Key Feature:

120A High Current Control System – Supports up to 120A total maximum current, delivering up to 1440W at 12V and 2880W at 24V for high-demand vehicle lighting and electrical control systems.

Dedicated 40A High Current Output – One dedicated 40A channel supports higher-current equipment such as large driving lights, roof-mounted work lights and other demanding electrical loads.

Eight Independent Main Outputs – Provides one 40A, two 30A, two 20A, two 15A and one 10A output to accommodate different electrical load requirements. The total combined operating current must remain within the 120A system limit.

6 Dedicated DRL Outputs – Six additional DRL connections support daytime running lights, accent lights and lamp backlighting without occupying the eight main output channels. A separate DRL switch provides independent control.

Physical Panel + Bluetooth APP Control – Operate connected circuits directly from the switch panel or use the Bluetooth APP for programming, live system monitoring and convenient smartphone control.

8 Programmable Control Groups – Create up to eight custom control groups, with each button function independently configurable within every group for different driving, work and lighting scenarios.

Flexible Channel Assignment – Assign multiple output channels to one button, allowing several lights or electrical devices to operate together through a single command.

3 OEM Signal Trigger Inputs with CAN Bus-Style Priority Logic – 3 sensor wire inputs allow programmed outputs to respond automatically to factory vehicle signals, using a CAN Bus-style 1＞2＞3 priority structure for predictable trigger control.

4 Control Modes – Each channel supports Steady On, Momentary, Slow Flash and Strobe operation for different lighting and electrical control requirements.

Adjustable Slow Flash Timing – Slow Flash intervals can be adjusted from 0.2 to 2 seconds through the APP, providing more precise control of warning and auxiliary lighting.

8 Adjustable Strobe Patterns – Eight selectable strobe frequencies can be configured through the APP for warning lights, emergency visibility, off-road lighting and other flashing applications.

Independent RGB Backlight for Every Button – Each switch button can be assigned its own RGB backlight color, making different circuits easier to identify while creating a personalized control interface.

Configurable Warning Indicators – Power-off and protection warning lights can be adjusted according to the required panel setup.

Real-Time Voltage Monitoring – Input voltage is measured every second and displayed in the Bluetooth APP, with a stated measurement tolerance of less than ±0.3V.

Low Voltage Battery Protection – When input voltage falls below the preset protection threshold, the system disconnects controlled loads to help prevent excessive vehicle battery discharge.

Real-Time Current Monitoring – System current is measured every second and synchronized with the APP, making electrical loads and abnormal current conditions easier to monitor.

Real-Time Circuit Board Temperature Monitoring – Internal circuit board temperature is continuously monitored and displayed in the APP, giving users clearer visibility into system operating conditions.

APP Vibration Feedback – Smartphone vibration provides tactile confirmation when controls are operated through the APP, making blind operation more convenient.

12V / 24V DC Compatibility – Supports both 12V and 24V vehicle electrical systems, providing up to 1440W at 12V and 2880W at 24V for passenger vehicles, off-road vehicles, trucks and other DC-powered platforms.

Factory Reset Function – Restore the system to its original default settings when reconfiguring the panel, changing installations or troubleshooting previous programming.

Cross-Shaped Dustproof Silicone Seals – Cross-shaped silicone seals around the wiring ports help reduce dust and moisture entry while allowing cables to pass through securely.

Four Mounting Options – Dedicated mounting brackets support four installation methods, providing greater flexibility for dashboards, center consoles, overhead positions and other vehicle interiors.

Complete Installation Kit – Includes 140 switch labels, dedicated mounting brackets, a screwdriver, large and small ACC fuse taps, quick-connect terminals and installation hardware.